World Leader in Imaging Technology
	AccuBeam™ Series High Resolution Auto-Align Imaging Platform

		Accu-Beam™ combines OLEC’s renowned auto-alignment registration system and imaging platform with the superior collimated lighting technology of PerkinElmer.® Accu-Beam can be configured to image flat-panel displays, high-density interconnect, photo-chemical machining, PCB innerlayer, outerlayer, and soldermask. The payback for this new platform is extremely short with increased yields from tight-tolerance registration, short setup time, and the high-resolution capability. Accu-Beam includes OLEC’s innovative automatic vision-based registration system, which can handle tasks impossible to achieve using conventional equipment and offers a much higher level of control and versatility. Accu-Beam comes standard with four program-mable cameras per tray and will align top-to-bottom-film and panel-to -film using a best-fit method. OLEC
	: : Back to Top : :     AccuBeam™ Standard Features Highly collimated optics with flipping mirror Go/no go print settings Precision Registration Programmable configuration Film-to-film / panel-to-film / fiducial-to-film registration. Exceptional for prototype, short-run, or tight-tolerance work Cameras are programmable to accommodate panel sizes & targets Quick and easy artwork setup and change over Independent tray programming for job flexibility Thermally or chemically strengthened glass for durability Pre and post-vacuum registration verification Up to 61 x 76 cm Image (24 x 30 inch) AccuBeam™ Optional Features HEPA filter with anti-static bar Anti-static bar (tray area) Additional 16,000 BTU A/C Single-sided collimation discount Safety kit (lamp handling) included High-speed shutter assembly – recommended for <2 sec. exposure Statistical register Absolute artwork deviation (glass register marks)
	: : Back to Top : :     Model AB30 Input voltage: 208-480 vac, 3 phase, 50/60 Hz pneumatics Air supply: 5 cfm @ 100 psig of cleaned filtered dry air Exhaust: Customer supplied 6.2bars / 335 clm Size: 49" x 82" x 120" / 1245mm x 2083mm x 3048mm Shipping weight: 2000lb / 908kg Optical Performance Collimated optics @ 365nm UV beam average intensity uniformity 5kW 24” x 24” / 610 x 610mm (±10%) 24” x 30” / 610 x 762mm (±10%) Minimum exposure area: 9" x 16" / 229mm x 406mm Exposure compartment specifications Temperature rise at phototool: <5° F (2° Celsius) Collimation: ± 1.5 degrees side by side Declination: <1 degree Light source: 5kW ozone free mercury / xenon short arc lamp Exposure controller: Automatic in millijoules, time mw/cm2 or manual operation

	OLEC Corporation 1850 East St. Andrew Place, Santa Ana, CA 92705 | Phone: (714) 258-5600 | Fax: (714) 258-5601
	Home | About Us | Products | Contact Us | News
	© 2008 OLEC Corporation All Rights Reserved