World Leader in Imaging Technology
	AccuTray™ Series Automatic Alignment Semi-Auto Circuit Imaging Platform

		The AccuTray™ AT30 is OLEC’s innovative, automatic vision-based registration system for imaging printed circuit boards or chemical machining. The AccuTray™ AT 30 can handle tasks impossible to achieve using conventional equipment and offers a much higher level of control and versatility. The AT30 comes standard with two programmable cameras per tray. (with an option of four independent cameras per tray) AccuTray™ will align top-to-bottom-film and panel-to-film using a best-fit method.
	: : Back to Top : :     AccuTray™ AT30 Auto Align Imaging Platform Automatic Alignment with precise registration Go / No-go print settings Film-to-film / panel-to-film / fiducial-to-film registration Exceptional for prototype, short-run, or tight-tolerance work Built-in cameras are position programmable to accommodate panel sizes and targets Quick and easy artwork set-up and change over Independent tray programming for job flexibility Thermally or chemically strengthened glass for durability Pre and post-vacuum registration verification Available as a single or dual-tray AT 30
	: : Back to Top : :     Model AT30 Maximum exposure area: 24" x 30" / 610mm x 762mm Minimum exposure area: 9" x 16" / 229mm x 406mm Input voltage: 208/240 vac Maximum current: 65 amps (AT 30 5000) / 90 amps (AT 30 8000) Air requirements: 9psi / 12cfs - 6.2bars / 335 clm Size: 49" x 78" x 97" / 1245mm x 2261mm x 2464mm Shipping weight: 1500lb / 681kg (AT 30 5000) - 2000lb / 908kg (AT 30 8000) Water volume per minute: 7gal / 261ltr (AT 30 5000) - 10gal / 381ltr (AT 30 8000) Water temp: 45°f / 7°c

	OLEC Corporation 1850 East St. Andrew Place, Santa Ana, CA 92705 | Phone: (714) 258-5600 | Fax: (714) 258-5601
	Home | About Us | Products | Contact Us | News
	© 2008 OLEC Corporation All Rights Reserved