World Leader in Imaging Technology
	MicroPrint™ Series Hybrid Collimation Auto-Align Imaging Platform

		The MicroPrint™ MP30 is OLEC’s innovative, automatic vision-based registration system for imaging printed circuit boards or chemical machining. The MicroPrint™ MP30 can handle tasks impossible to achieve using conventional equipment and offers a much higher level of control and versatility. The MP30 comes standard with four independently driven cameras. Which allows; Simultaneous capture of images, faster alignment time, more flexibility for fiducial placement, maximized usage of panel, and improved illumination. Auto Opening Trays provide improved cycle times, and operator convenience. New software displays all four camera's on the monitor at once. Hybrid collimation increases the fine line maximum exposure area. OLEC
	: : Back to Top : :     MicroPrint™ MP30 Auto Align Imaging Platform Automatic Alignment with precise registration Go / No-go print settings Film-to-film / panel-to-film / fiducial-to-film registration Exceptional for prototype, short-run, or tight-tolerance work Four independently driven cameras Quick and easy artwork set-up and change over Independent tray programming for job flexibility Thermally or chemically strengthened glass for durability Faster alignment times Auto opening Trays Pre and post-vacuum registration verification Available as a single or dual-tray MP30 Hybrid Collimation increases fine line maximum exposure area Displays all four camera's on monitor at once
	: : Back to Top : :     Model MP30 Maximum exposure area: 24" x 30" / 610mm x 762mm Minimum exposure area: 9" x 16" / 229mm x 406mm Input voltage: 208/240 vac Maximum current: 65 amps (AT 30 5000) / 90 amps (AT 30 8000) Air requirements: 9psi / 12cfs - 6.2bars / 335 clm Size: 49" x 78" x 97" / 1245mm x 2261mm x 2464mm Shipping weight: 1500lb / 681kg (AT 30 5000) - 2000lb / 908kg (AT 30 8000) Water volume per minute: 7gal / 261ltr (AT 30 5000) - 10gal / 381ltr (AT 30 8000) Water temp: 45°f / 7°c

	OLEC Corporation 1850 East St. Andrew Place, Santa Ana, CA 92705 | Phone: (714) 258-5600 | Fax: (714) 258-5601
	Home | About Us | Products | Contact Us | News
	© 2008 OLEC Corporation All Rights Reserved